Prebug Stage6 trans cover with inspection plate
Stage6 R/T Transmission Cover, reinforced racing gear box cover for Zuma vertical, OR LC/DISK cases. Will NOT work on normal zuma horizontal engines.
WILL work on vertical prebugs, and euro LC aprilia/malaguti/italjet engines
It is CNC-milled from high-strength aluminium alloy 7075-06 and is equipped with HQ needle bearings, a removable inspection lid for checking on gears and oil, a Viton oil seal, a bearing for the clutch shaft and gaskets for sealing.
As usual for Stage6, quality of materials and workmanship are above reproach.
Also worth mentioning is the fact that the cover can be easily taken off; it is attached with 3 M6 bolts located at the outside edge so you don't have to touch any part of the actual transmission.
This gear box cover by Stage6 R/T (Racing team) will add some high-tech to your bike.
grab an extra O ring while your at it
ELITE Dio upgear kit
When doing a big bore kit, you need gears. Without them you are never going to take advantage of the extra power. Choose whichever set fits your needs. I suggest...
Honda Elite Transmission Gasket
If your doing a gear upgrade on your 94-01 honda elite sa50, or af18/af16 powered bike, here's an oem solution to keep the oil where it belongs. Will work on...
Malossi gears AF05E
Need some better gearing for top speeds, on your 85-87 Aero, or your 87-93 elite 50cc. This is the only kit offered by Malossi, to give you higher top speeds....
TFC billet CNC trans cover
VERY limited stock on these, billet taiwan cnc colored trans covers. These are a killer upgrade for your bike! Now these come with needle bearings vs the oem alum piece. Less...